This device driver communicates with the LabJack U3 and U6 over USB and the LabJack UE9 over either USB or Ethernet. This driver supports all modes of operation. This driver appears as LabJackUD within DAQFactory. The LabJack U12 driver appears as LabJack_U12, while the LabJack T series device driver shows up as LabJackM. These are the names LabJack gave their driver libraries.
Sections 17.7.2 and sections 17.7.3 are basically a copy of the section on creating channels in the Guided Tour of chapter 2 with an added section on doing Ethernet on the UE9, differential inputs, and a section on pinouts. If you are just getting started, we recommend going through the guided tour, and following section 2.5.4 which will utilize your new LabJack U series device.
